NRF52840 Eval Kit User Manual
Vision: V1.0.1 Date: 2019.01.19 69 / 72
ii. Press Button2 on the client board to turn OFF LED1 on all servers
with ODD addresses
iii. Press Button3 on the client board to turn ON LED1 on all servers
with EVEN address
iv. Press Button4 on the client board to turn OFF LED1 on all servers
with EVEN address
g) Press Button1 on the servers to locally change the state of LED1 and
observe that the client receivers the status message from the
corresponding server containing the new state value.
h) You can monitor the RTT logs with J-Link RTT viewer by connecting
provisioner and client.
To Next Page
Loading...