Waydoo Flyer EVO USER GUIDES
© 2024 All rights reserved by Waydoo
2) Attach the stabilizer wing on the propulsion unit stabilizer mount, use two
M6X20 bolts, tighten it with a L-shaped wrench or electric screwdriver,
torque 5-10 N.m.
Tips:
1) The convex mounting position is designed to facilitate the wing
installation.
2) When install stabilizer wing, its stability can be improved by using
stabilizer wing extended rod.
4. Turn on the remote/board
First turn on the remote, then turn on the Powerflight battery.
5. Connect the remote
If the remote does not connect to the board automatically, please pair them
by taking steps below.
To Next Page
Loading...
