Need help?Do you have a question about the Wayne DW-12 and is the answer not in the manual?
General| Print Speed | Up to 6 inches per second (150 mm/s) |
|---|---|
| Noise Level | 55 dB |
| Connectivity | USB, Serial |
| Interface | USB, Serial |
| Media Width | 2 inches (50.8 mm) |
| Paper Width | 2 inches (50.8 mm) |
Details recommended paper specifications and cautions for use and storage, including environmental factors.
Explains the function of the FEED and TEST buttons, and the status of the ERROR and POWER indicator lights.
Provides instructions on how to properly open and close the printer door on the dispenser.
Step-by-step guide with images for loading paper rolls into the printer.
Identifies key internal parts of the printer, such as the auto cutter, paper inlet, and levers.
Instructions on how to adjust the paper width lever for different paper sizes.
Details how to adjust the low paper sensor position based on paper roll diameter and remaining length.
Describes symptoms indicated by the ERROR light, such as paper end, door open, head overheat, and cutter lock.
Provides detailed steps and cautions for safely removing jammed paper from the printer.
Details the function and initial settings of DIP switches for printer configuration.
Illustrates and labels the physical locations of various printer components.
Provides specific advice for replacing the printer on 4/Vista dispensers.
Lists the specific part numbers for the DW-10 and DW-12 printers.
To Next Page
