Digital Video Recorder(DVR)
User Manual
Operation Description
Click Menu in the upper left corner of the camera management screen and choose
Camera tamper to access the Camera tamper screen, as shown in Figure 5-11.
Figure 5-11 Camera tamper screen
Operation Steps
Step 1 Select a camera in the camera list on the left side of the camera tamper screen.
Step 2 Click next to Start camera tamper to enable camera tamper.
Step 3 Click next to Processing method to access processing method screen.
For details, please see Step 2~Step 5.
Step 4 Click OK to save camera tamper settings or click Copy to all, then click OK to apply
the camera tamper settings to cameras of all channels.
----End
5.8 OSD settings
Click Menu in the upper left corner of the camera management screen and choose
Setup OSD to access the OSD setting screen, as shown in Figure 5-12.
To Next Page
Loading...
Need help?
General
