Digital Video Recorder(DVR)
User Manual
(1) Click , the message “Are you sure to
restore?” is displayed.
(2) Click OK, the message “Apply success! The
device is rebooting, please login later!” is
displayed.
(3) NVR reboot and enter to login interface.
(1) Click , the message “Confirm closed?”
is displayed.
(2) Click OK, the message “The device has been
closed !” is displayed.
(3) NVR is closed.
----End
9.6 Alarm
You can set motion alarm in alarm interface.
Operation Steps
Step 1 On the System Setting screen, choose Alarm >Channel Alarm to access the motion
alarm interface, as shown in Figure 9-15.
To Next Page
Loading...
Need help?
General
