SmarTemp Control 3.0 Installation - Operating Instructions
9
Reset to Default
Returns all settings to factory default values.
Back
Select this to return to the previous screen. N/A
Status Indicator Lights - The Red status indicators (heater "ON") and LCD screen backlight turn off after 30
seconds. A touch of any button or a turn of the rotary knob will re-activate these lights. If the "Webasto"
button is used to re-activate these lights, an additional press of this button is necessary to turn the heater off.
Note that when the heater is "ON" the display is active.
To Next Page
Loading...