Webasto Thermo Top C Operating And Maintenance Instructions

Hold handheld transmitter with antenna pointing straight
upwards and press the ON button for 1 or 2 seconds.
NOTE:
In heating mode, the vehicle heating must be set to
"warm" before leaving the vehicle.
In both heating and ventilation modes, the vehicle fan
must be set to the 1st speed in the case of a 3-speed
fan and to the 2nd speed in the case of a 4-speed fan.
Fans with infinite adjustment must be set to at least
1/3 of the fan performance.
Via handheld transmitter:
Via timer:
Hold handheld transmitter with antenna pointing straight
upwards and press the OFF button for 1 or 2 seconds.
Press the direct heating button twice.
!
Switch heater or ventilation on
Switch heater or ventilation off
Check and set duty period
Check duty period
NOTE:
The duty period must be set to 20 or 30 minutes in heating mode for the
Thermo Top and Thermo Top T heaters.
The heating time should correspond to the driving time for Thermo Top C and
Thermo Top E heaters.
For instance, if the vehicle is used for driving to and from work.
We recommend that the duty period be set to 30 minutes for a journey lasting
approx. 30 minutes (one way).
The duty period of the heater or vehicle fan can be set on the transmitter in
10-minute increments. The duty period is set to 30 minutes as the manufacturer's default
setting.
NOTE:
The first flashing pulse output simultaneously with
the third actuation of the two buttons must also be
counted.
The LED flashes in accordance with the set duty period.
Simultaneously press the ON and OFF buttons three times
briefly in succession within one second.
Number of flashes
Duty period
1
10 min.
4
40 min.
2
20 min.
5
50 min.
3
30 min.
6
60 min.
3x
!
!
3-program timer
Direct heating Return Program selection Forward
Symbol
for set /
view time
Program
number
indication
Time
button
Heating
indication
Display illumination
General
Switching on
Set time
View time
Program start
of heating
Delete
program
Select
programmed
time
Switching off
1
2
3
SET
SET
SET
SET
SET
Note
changeover
from summer
to winter time
(and vice versa)
!
The time at which heating starts can be set precisely between
“1 minute" and "24 hours". Three switch-on times can be
programmed, but only one can be activated at any one time.
Maximum duty period: 60 minutes.
Manually: by pressing the direct heating button
Automatically: by preprogramming the time at which heating starts
The program number appears in the display and the
display lights up.
Manually: by pressing the direct heating button
Automatically: by limitation of the duty period.
The display lighting goes out.
Press the time button and then forward or back .
Press the time button .
Press button.
Within 10 seconds, press either forward until the time
at which heating is to start appears on the display.
If a different program number is required, press the button within
10 seconds in each case.
or back
Briefly press the button.
Press the button within 10 seconds in each case until the program
number with the required time is displayed.

Webasto Thermo Top C Specifications

General

Brand	Webasto
Model	Thermo Top C
Category	Water Heater
Language	English