EasyManua.ls Logo

Weber mt VPR 450 - User Manual

Weber mt VPR 450
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating and
Maintenance Manual
VPR 450
VPR 700
0105002
0105001

Questions and Answers

Summary

Introduction

Description

The machine

Describes the hand-guided soil compactor for terrace construction and paving applications.

Technical Data

Safety

General Safety Instructions

General safety instructions for operating the machine and accident-prevention regulations.

Intended and Non-intended Use

Defines the intended use and lists applications for which the machine is not suitable.

Residual Risk

Highlights the risk of accidents in the immediate danger area around the machine.

Operator Requirements and PPE

Operator age, instruction, and required personal protective equipment for safe operation.

Danger Areas and Modifications

Defines danger areas and guidelines for spare parts, changes, and conversions.

Pre-Operation Checks

Crucial checks and precautions to take before starting the machine.

Start-up and Operation Safety

Safety procedures for starting the engine and operating the machine.

Parking and Fueling Safety

Safe practices for parking the machine and fueling the engine.

Cleaning and Engine Safety

Guidelines for cleaning the machine and safe handling of combustion engines.

Machine Inspection

Procedure and frequency for inspecting the machine to ensure operational safety.

Safety Symbols and Signal Words

Explains the meaning of signal words and symbols used in safety instructions.

Information and Safety Stickers

Details specific safety stickers and their meanings for machine operation.

Operation

Preparing for Initial Use

Steps to prepare the machine for its first use, including checks and fluid levels.

Machine Components Overview

Identifies and labels key components of the VPR machine.

Pre-Start Checks

Essential visual and fluid level checks before starting work to prevent failures.

Starting the Engine

Step-by-step guide for safely starting the engine, including safety precautions.

Compacting Operation

Instructions for safely compacting with the machine, including guidance and V-belt precautions.

Switching off the Engine

Procedure for safely shutting down the engine and parking the machine.

Transport

Lifting the Machine

Guidelines and safety precautions for lifting the machine for loading onto a vehicle.

Storage

On-Site Storage

Procedures for securing the machine when stored overnight at the construction site.

Extended Period Storage

Measures to take when storing the machine for longer than one month.

Maintenance

General Maintenance Information

Provides instructions for regular maintenance and safety precautions for maintenance personnel.

Maintenance Personnel Requirements

Specifies qualifications, training, and PPE required for maintenance personnel.

Maintenance Safety Precautions

Details safety measures during maintenance, including fluid handling and safeguarding against start attempts.

Maintenance Schedule Overview

Presents a schedule of maintenance activities, their frequency, and corresponding section numbers.

Engine Oil Maintenance

Detailed procedures for checking and changing the engine oil level.

Air Filter Maintenance

Procedure for cleaning the air filter, including component identification and steps.

Exciter Oil and V-Belt Maintenance

Instructions for changing oil in the exciter and checking the V-belt for wear.

Spark Plug Adjustment and Replacement

Procedure for adjusting or replacing the spark plug, including gap measurement.

Operating Fluids and Fill Levels

Details the types and quantities of operating fluids (oil, fuel) required for the machine.

Weber mt VPR 450 Specifications

General IconGeneral
BrandWeber mt
ModelVPR 450
CategoryConstruction Equipment
LanguageEnglish

Related product manuals