Weber mt VPR 450 - Exciter Oil and V-Belt Maintenance

24
8.2.4. Change the oil in the
exciter
Start the engine and allow the engine to warm up for
a few minutes.
Switch o󰀨 the engine.
Park the machine on a level subsurface.
Loosen the oil drain plug (1).
Extract the oil using a suitable pump
Fill fresh oil into the exciter in accordance with the specication.
Close the oil drain plug.
Shut down the machine.
Remove the V-belt guard (1).
Check the V-belt (2) for cracks and wear.
Replace the V-belt if it shows signs of extensive wear or
other damage.
Fit the V-belt guard.
8.2.5. Check V-belt
2
1
1