Weber mt VPR 450 - Engine Oil Maintenance

22
WARNING
If lubricating oils and fuel come into contact with skin, they can
cause skin cancer.
Wear protective gloves.
If skin contact has occurred, wash the a󰀨ected areas
thoroughly.
8.2. Description of the maintenance operations
8.2.1. Check the engine oil level
Park the machine on a horizontal subsurface.
Switch o󰀨 the engine and wait for several minutes until the
oil has collected in the crankcase.
Unscrew the oil dip stick (1) from the crankcase.
Wipe o󰀨 the oil dip stick with a clean cloth.
Insert the oil dip stick in the oil ller neck as shown, but do
not screw it in.
Pull out and read the oil dip stick; the correct oil level ranges
between the upper level (max) and the lower level (min).
Screw the oil dip stick back into the oil ller neck.
1
8.2.2. Change the engine oil
CAUTION
Danger of burn injuries at the hot engine and its attachments.
Allow the combustion engine to cool down su󰀩ciently before
starting work.
Use extra caution during work on the engine when it is at
operating temperature.
Start the engine and allow the engine to warm up for a few
minutes.
Switch o󰀨 the engine.
Unscrew the oil dip stick (1). It also serves as the seal for
the oil ller neck.
Place a suitable collection vessel under the oil drain.
1
max.
min.