Weber mt VPR 450 - Air Filter Maintenance

23
Remove the oil drain plug (2)
CAUTION! Danger of scalding due to hot oil.
Wear protective gloves.
Use extra caution.
Allow the oil to drain into the collection vessel.
Install the oil drain plug.
Fill fresh oil into the engine in accordance with the
specication.
Check the oil level and top o󰀨 to the “max.” mark.
Screw in the oil dip stick.
2
8.2.3. Clean the air lter
Open the air lter cover. Loosen the wing nut (1) to do so.
Remove the air lter insert. Loosen the wing nut (2) to do so.
Separate the non-woven material (3) from the air lter
insert (4).
Blow out the non-woven material and the air lter insert
from the inside to the outside.
Check for damage. Use a new air lter insert in case of
damage or excessive clogging.
Pull the non-woven material over the air lter insert.
Install the air lter insert using the corresponding wing nut.
Install the air lter cover using the corresponding wing nut.
1
2
3
4