5 -
Setup and Assembly
Initial commissioning by a qualified technician
Attention!
To safeguard any warranty claims, the fully completed proof of initial commissioning must be returned to the manufacturer.
Tested points:
• Tire changer skillfully unpacked and transported to the assembly site.
• User's manual read and understood
• Tire changer mounted and screwed to a flat base
• Correct electrical connection
• Mounting column fixed
• Basic settings checked or changed
• Tire Changer Tested
No shortcomings were found, so there are no doubts about commissioning.
The owner/user was extensively informed and trained by the expert in the proper use of the product.
of the tire changer.
__________________________
Location, Date Signature expert
____________________________________________
Expert name
____________________________________________
Address expert
____________________________________________
____________________________________________
CAUTION: Please return to the distributor current proof of initial commissioning prepared by the authorized service
technician to ensure that any warranty claims are admissible.
To do so, tear off the strip below and return it by letter to Brown s.a., Avenue des Artisans 14, 7822 Ghislenghien , or by fax to
068 44 88 90.
PROOF OF INITIAL COMMISSIONING BY AN AUTHORIZED EXPERT FOR:
Weber 1228-Monster Tyre Changer, Year of production __________, Serial No. ______________________________
Location, Date
Signature expert
____________________________________________
Expert name
____________________________________________
Address expert
Weber GmbH
Sülzbach 1
D-37293 Herleshausen
info@weber-werke.de
____________________________________________
To Next Page
Loading...