Weco ESS 5K3-XP - Page 18

WECO 5K3-XP RACK LV-EMEA
18
Version 11/11/2021
2.1.4 Accessory List (Standard Kit 120A Single Module HV)
The Battery Module is packed in a carton box together with standard accessories. When unpacking the Battery Module,
be sure to check that the Battery Module and accessories are free from damage and that the correct quantities of each
component are included within the carton.
The following list of components can be used as a checklist when unpacking the individual Battery Module and battery kits.
Rack Screw Set
1 Set of 4 screws + nuts with each Battery
( accessory)
WECO Bus Bars
1 couple of bus bars RED / BLACK
( Accessory not included)
RS485 cable RJ 45
1 x RS485 200cm cable for RS485 A/ RS485
B connection (Included)
Power positive cable from inverter
1 x 250cm POWER CABLE Red 25mmq
RING Terminal ( Included)
Power negative cable from inverter
1 x 250cm POWER CABLE Black 25mmq
RING Terminal ( Included)
T568B RJ45/CANL CAN H cable
1 x 220cm CAN/BMS connection between
Master Module and Inverter
( Included)