Need help?Do you have a question about the Weco ESS 5K3-XP and is the answer not in the manual?
General| Nominal Voltage | 48 V |
|---|---|
| Usable Energy | 4.8 kWh |
| Max. Charge/Discharge Current | 100 A |
| Operating Temperature | -10°C to 50°C |
| Cycle Life | 6000 cycles |
| Communication | CAN, RS485 |
| Warranty | 10 years |
| Chemistry | LiFePO4 |
| Input Voltage | 48 V |
| Output Voltage | 48 V |
| Output Power | 5 kW |
| Communication Interface | CAN, RS485 |
| Weight | 45 kg |
| Protection | Over-current, Short-circuit |
Covers installation environment requirements and general safety guidelines for safe operation.
Details hazards associated with LiFePO4 batteries and necessary precautionary measures for safety.
Outlines preparatory steps before installation, including location requirements and cable considerations.
Provides essential information for storage, transportation, and handling of the battery module.
Details the process of connecting multiple LV battery modules in parallel within a system rack.
Explains the data connections and ports on the battery module, including terminal definitions.
Provides procedures for activating and shutting down the battery module, including status indicators.
Configuration of DIP switches for low voltage parallel connections, including master/slave settings.
Details the DIP switch configuration for connecting up to 15 modules in parallel.
Procedure for auto ID assignment and DIP configuration for parallel clusters, including startup process.
Guidelines for making secure and correct parallel power connections between battery modules.
Discusses cable sizing, capacity reduction factors, and terminal block support for connections.
Specifies conditions and requirements for operating multiple battery modules in parallel.
Procedure for recovering batteries from an under-voltage state using forced charging.
Details on direct parallel connection of LV batteries without certified inverter BMS communication.
Technical specifications for the 5K3-XP RACK LV module, including voltage, capacity, and temperature limits.
Lists compatible inverter brands and models for use with the WECO battery system.
Provides pin-out details for CAN terminal connections between batteries and various inverters.
Contains critical notes on data changes, charging/discharging limits, warranty, and alarms.
To Next Page
