WECO 5K3-XP RACK LV-EMEA
8
Version 11/11/2021
Safety Warnings and Notifications
Installation environment requirements: The WeCo 5K3-XP Rack Battery Module is designed for Industrial and commercial
ESS purposes. For installation, it must be installed in a location complying with IP20 (IP 55 or 65 can be achieved with a
cabinet). Installations in locations/cabinets that do not comply with IP20 may cause failures and/or damages to the
product, in which case the product warranty will become void.
Safety Guidelines
CAUTION：
Adequately insulated tools (as defined by ASTM F1505 / IEC 60900:2012 “Standard Specification for Insulated and
Insulating Hand Tools”) shall be used at all times, to ensure battery terminals are not short-circuited.
All electrical connections on the WeCo 5K3-XP Rack Battery Module shall be made only by qualified personnel.
When installed and operated in accordance with this manual, the WeCo 5K3-XP Rack Battery Module will perform in a
safe and reliable manner in accordance with the battery operating specifications.
Subjecting the battery to an unsuitable operating environment or to damage, misuse or abuse may result in health and
safety risks, such as overheating or electrolyte smoke potential. All personnel must comply with the safety precautions
and observe all warnings as detailed in this document. If any of the safety precautions or procedures detailed in this
manual are not fully understood by the reader, the reader must not perform any operation on the battery until they have
contacted the WeCo technical service representative for clarification and confirmation of understanding of the correct
procedure.
The safety guidelines included in this document may not include or consider all the regulations in your area of
installation/operation. When installing and operating this product, the installer must review and consider applicable
Federal, State, and Local laws and regulations in accordance with the industry standards of the product.
Installation personnel shall not wear metallic objects, such as watches, jewelry, and other metal items when performing
installations. Do not store un-insulated tools in pockets or tool belts while working in the vicinity of the battery to avoid
short circuits and personal injuries.
CAUTION:
The weight of an individual WeCo 5K3-XP Rack Battery Module is 54.3 kg. Please use the original packaging and follow
all safety precautions if the Battery Module is to be relocated to another location, to avoid damage to the product and
personal injury.
ATTENTION:
The maximum number of modules composing an LV string must not exceed 15.
To Next Page
Loading...
Need help?
General
