Wecon LX Series User Manual

WECON Technology Co., Ltd.
14
execute; this resets all devices except for retentive timers, counters and devices
driven by SET/RST instructions.
- The MC instruction can be used as many times as necessary, by changing the
device number Y and M. Using the same device number twice is processed as a
double coil (see section 2.5.2). Nest levels can be duplicated but when the nest level
resets, ALL occurrences of that level reset and not just the one specified in the local
MC.
Nested MC program example:
15. Set and Reset

Wecon LX Series Specifications

General

Brand	Wecon
Model	LX Series
Category	Controller
Language	English