Weed Eater VIP HDF550A - Tools Required for Assembly

ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use the
correct tools as necessary to insure proper tightness.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly easier. Standard
wrench sizes are listed.
{1) Utility knife
(1) Pair of pliers
(1) Screwdriver
(2) 1/2" wrenches
FRONT
LEFT
RIGHT
TOR'S
u
(1) Cotter Pin
(1) Clevis Pin
(1) Manual
5