weewell WMA450 - Page 4

I
WMA450 User Manual
4
Parent unit power adapter: 6V DC 500 mA
9.The power adapters are intended to be correctly oriented in a
vercal or oor mount posion. The prongs are not designed to hold
the plug in place if it is plugged into a ceiling, under-the-table or
cabinet outlet.
10.Unplug this product from the wall outlet before cleaning. Do not
use liquid or aerosol cleaners. Use a damp cloth for cleaning.
11.Unplug the power cords before replacing the baery.
12.Do not cut o the adapters to replace them with other plugs, as
this causes a hazardous situaon.
13.Do not allow anything to rest on the power cords. Do not install
this product where the cords may be walked on or crimped.
14.This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type
of power supply in your home, consult your dealer or local power
company.
15.Do not overload wall outlets or use an extension cord.
16.Do not place this product on an unstable table, shelf, stand or
other unstable surfaces.
17.This product should not be placed in any area where proper
venlaon is not provided. Slots and openings in the back or boom
of this product are provided for venlaon. To protect them from
overheang, these openings must not be blocked by placing the
product on a so surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator or heat register.
18.Never push objects of any kind into this product through the slots