WEG CFW100 - IOADR - Page 11

Infrared Remote Control and I/O
Expansion Module
English
CFW100 | 11
Figure 1: Remote Control (infrared)
Table 4: Operation of the remote control keys
Key Description
Start/Stop Motor.
Browse CFW100 display.
Browse CFW100 display.
Commute view between P842 and
P843 parameters.
Confirm / Program parameter on the
CFW100 display.
Special Function 1.
(*)
Special Function 2.
(*)
Special Function 3.
(*)
(*) Function available when SoftPLC application is installed.
Otherwise, this key has no function.