WeGo PACE plus User Manual

9
WEGO
™
PACE PLUS l User Manual
GENERAL OPERATIONS
SET MODE
How to set the HRM:
• Press S5 while “HRM” is blinking. ZONE “1”will
start to blink.
• Press S1/S11 to change the blinking digit.
• Continue setting other parameters by pressing S5
• Press S1/S11 to change the blinking digit.
• Press S5 to confirm.
• Press S7 to exit setting.
Level 1: 60~70% Max HRM (default 117~136 bpm)
Level 2: 70~80% Max HRM (default 136~156 bpm)
Level 3: 80~90% Max HRM (default 156~175 bpm)
How to set the CONTRAST:
• Press S5 while “CONTRAST” is blinking.
Contrast percentage will start to blink.
• Press S1/S11 to change to your desired value
(contrast range is from 10 -100%).
• Press S5/S7 to confirm.
• Press S7 to exit setting.

WeGo PACE plus Specifications

General

Brand	WeGo
Model	PACE plus
Category	Heart Rate Monitor
Language	English