WeGo PACE plus User Manual

5
WEGO
™
PACE PLUS l User Manual
GENERAL OPERATIONS
OPTICAL HRM MODE
How to turn ON the Optical HRM:
• Press S5 while in TIME mode or CHRONO mode to
go to HRM mode. The watch will start searching for
your heart rate.
• The watch will display your Heart rate for 30 seconds.
The HR data is also locked for 30 seconds.
• During this time, S1 and S5 are locked and have
no function.
• During this period of 30 seconds, only S7 can exit
HRM mode.
• If you exit by pressing S7 within the 30 seconds
time frame, you cannot re-activate the HR mode
by pressing S5 again. You have to wait for the 30
seconds to lapse before you can re-activate the
HR mode.
• Without pressing any pushers, HRM mode will
automatically exit to previous mode after 30 seconds.
While running:
• If current HRM is below preset lower zone, down
arrow will blink to remind you to speed up, the
watch will alert you with a warning sound.
• If current HRM is above preset upper zone, up
arrow will blink to remind you to speed down, the
watch will alert you with a warning sound.
Please be sure to set your user info!
Press S5
Time mode
chrono mode
auto
Signal not yet received Signal received
%Max HR
Previous
view
OR After
2~3min
5~6 sec
auto

WeGo PACE plus Specifications

General

Brand	WeGo
Model	PACE plus
Category	Heart Rate Monitor
Language	English