WEICHAI WP10.270 - Appendix: Power Correction Factor

Operation and Maintenance Manual forWP10 Series Four-valve Diesel Engine (China IV, V)
42
1. The temperature in this table is that of intake air, and the air pressure (not equal to atmospheric pressure) is that of dry intake air. 2. This table only suitable for the temperature range of 10-40°C, and air pressure range of 80-110kPa. In order to make actual air inlet status
meets the above conditions, the engine test should be carried out in proper time by adopting suitable measures.
3. P
e0
=a
d
*P
e
(P
e0
is corrected power, P
e
is measured power, a
d
is correction factor)
Appendix: Power correction factor
Air pressure
Temperature