Weichai America Corp.
Revision: August 2019 33
Fig. 8-3 Locating pin installation for Gear Housing
(2) Apply sealant on the sealing surface of the Gear Housing. Ensure that the sealant is evenly
distributed and continuous.
Fig. 8-4 Sealing surface of Gear Housing
(3) Place the gear housing with alignment pins in the pin holes. Knock the cover edge gently
with a nylon rod such that the cover and engine block can fit together closely.
WEICHAI & PSI SERVICE MANUALS AVAILABLE ONLINE AT FLYPARTSGUY.COM
GET YOUR WEICHAI & AFTERMARKET SERVICE PARTS AT FLYPARTSGUY.COM
To Next Page
Loading...
