5 Putting into operation
72
Operator’s Manual | 1190e | 1000441528 | 08/2022 | [en]
5.2 Setting up the operator station
5.2.1 Adjusting the seat
WARNING
Risk of accident when adjusting the seat during opera-
tion!
Adjusting the seat during operation may result in an acci-
dent, serious injury or death.
► Adjust the seat before commissioning the vehicle.
► Ensure that the levers for seat adjustment are locked
into place.
Always adjust the seat to individual needs, e.g. height and
posture. These settings prevent tension and fatigue when
working.
Adjust the seat so that all control levers, pedals and
switches are easily accessible while your back is resting
against the backrest.
The seat is of essential importance for reducing the vibra-
tions transferred to the operator. If the seat must be re-
placed, contact the manufacturer.
The vehicle is equipped with a seat switch. The vehicle can
only be operated when the operator of the vehicle is seated
in the seat. When the operator leaves the seat, the drive
system and hydraulic functions are switched off, even while
driving.
To Next Page
