23
48. Attach an Arm Pad (74) to the VKR Arm (52) with
two M6 x 57mm Screws (113) and two M6
Washers (98).
Repeat this step for the other Arm Pad (not
shown).
49. Insert the Barbell (35) through the Right and Left
Guides (39, 38). Attach the Left Barbell Adapter
(36) to the Barbell with an M8 x 63mm Bolt (118),
two M8 W
ashers (95), and an M8 Nylon Locknut
(97).
Attach the Right Barbell
Adapter (not shown)
in the same way.
48
74
52
98
113
35
36
95
39
38
95
97
1
18
49
47. Attach the Backrest (73) to the Center Upright
(29) with two M6 x 63mm Screws (106) and two
M
6 Washers (98).
A
ttach the Headrest (72) to the Center Upright
(29) in the same manner.
4
7
72
73
98
106
98
106
29
To Next Page
Loading...
Need help?
General
