76
June, 2016
MONTHLY CHECKLIST
ENSURE THE MACHINE HAS BEEN LOCKED OUT / TAGGED OUT AND THAT ALL COMPONENTS ARE COOL TO THE
TOUCH BEFORE PERFORMING MAINTENANCE ON PARTS.
Apply Lithium #2 grease all chains and bearings as well as the main shaft.
Apply Lithium #2 grease to all fittings.
Tighten all nuts and bolts on moving parts.
Check Oil Level in Gear Box.
Check Oil Level in Cam Boxes.
Machine must be powered on for this test, power it off and Lock Out when the test
is complete:
Test if the Filter Regulator is functioning properly and check for air leaks in the machine.
Remove and clean all vacuum generator filters (if applicable.) Reinstall when clean.
Check for any damaged electrical wiring or damaged power cables.
Inspect machine for signs of oxidation or residue buildup.
Check Tension on all Chains and Springs on the machine.
To Next Page
Loading...
