77
July, 2016
Examine Pull Belts for wear or
damage, worn out Pull Belts will
appear either glazed over or
hazy.*
Clean Jaws, check for chipping or
damage to jaw face and plastic
residue.
Inspect and add 3 in 1
Professional White Lithium Grease
to the open gears behind the pull
belts**
*These components must be replaced regularly as they wear out. Replace components that fail visual
inspection.
**Apply a small amount of grease to the teeth of the open gears. Run the open gears for at least one
cycle to ensure the grease is applied safely to all the teeth.
APPLY GREASE
TO OPEN GEARS
To Next Page
Loading...
