Resuscitation with
Manual Mode
2. Select patient group and switch to
“Manual” mode. Alternatively, select
“New patient”, set the patient’s gender
and height and select “Manual” mode.
Note: It is possible to switch to “Man-
ual” ventilation mode from any ventila-
tion mode at any time.
3. Check ventilation parameters.
Hold the mask over the patient’s mouth
and nose using the “double C grip”.
Keep the button on the MEDUtrigger
depressed until two mechanical breaths
have been administered.
In order to achieve maximum possible
oxygen concentration, set the displayed
“For max. O
2
i set” value in l/min on the
oxygen supply.
1. Switch on ventilator.
To Next Page
Loading...
