Function Check
Hazardous therapy if device connected to patient during function check!
If the device is connected to the patient during the function check, this might lead to
therapy posing a risk as a result of excessively high pressures or unsuitable ventilation
volumes. This might expose the patient to the risk of serious or life-threatening injury.
Always disconnect the device from the patient for the function check.
Perform a function check at the following intervals:
Part Interval
Device • Before each use
• After each hygienic reprocessing
• After each repair
Breathing circuit • Before each use
• After each hygienic reprocessing
• After each repair
To Next Page
Loading...
