Personal injury
The safe and risk-free use of the awning can only be guaranteed if the system is checked and
maintenance is performed on it on a regular basis.
Observe the maintenance requirements and maintenance intervals.
Inspect the awning at regular intervals for signs of wear and tear or damage to the
awning material and frame.
Check the awning at regular intervals for signs of damage to the leads.
Do not use systems in need of repair. Ensure people keep clear of any dangerous
areas.
Should you detect any damage, contact a specialist retailer or a suitable service
company to carry out the repairs.
Carry out the following maintenance and care tasks as required, once every spring, or
whenever the awning has not been in use for a long time. Performing these tasks will
extend the operating life of your awning system.
Our recommendation: Call in a specialist company to carry out the necessary
maintenance and care work.
5.1 Lubricating all movable parts
Damage to the product
Use greases, sprays or liquids that contain elements of Teflon, PTFE or comparable agents. For
best results, use a water-repellent and soil-repellent lubricant.
The lubricant manufacturers' guidelines must be observed.
Do not use lubricants that corrode plastics.
• Flange sleeves in upper arm insert
Only spare parts approved by weinor may be used.
To Next Page
Loading...
Need help?
General
