weinor VertiTex WeiTop User Manual

VertiTex WeiTop – Instructions for assembly, maintanance and use |
Informations importantes pour les revendeurs spécialisés et l’utilisateur final Version | Version 24.10.2019
Reserve technical changes | Sous réserve de modifications techniques Item no. | N° art. 126363-0000 Page | Page 1/28
126363
Please read these instructions and observe their
content and warnings before commencing any
installation work. This information is important for
the installation and the proper use of the material.
Follow the specified installation steps precisely and
observe the details and recommendations.
Only trained personnel may put the units into
operation.
The assembly instructions must stay with the end
consumer!
Avant le montage, veuillez lire cette notice et en
respecter le contenu ainsi que les mises en garde.
Ces indications sont essentielles en vue du montage
et de l‘utilisation correcte du matériel.
Veuillez respecter les étapes de montage indiquées
et tenir compte des instructions et des recomman-
dations.
Seul un personnel formé est habilité à effectuer la
mise en service des installations.
La présente notice doit être conservée par
l’utilisateur final!
ENGLISH
FRANÇAIS
VertiTex WeiTop
Instructions for assembly, maintanance and use
Informations importantes pour les revendeurs
spécialisés et l’utilisateur final
Awnings Patio roofs Glasoasen®
Stores Toits de terrasse Oasis de verre®

weinor VertiTex WeiTop Specifications

General

Brand	weinor
Model	VertiTex WeiTop
Category	Accessories
Language	English

Summary

1. Important notes/Safety notes for assembly instruction

1.1 Safety notes

General safety notes for assembly procedures.

1.2 Read the assembly instruction

Instruction to read and follow the assembly manual.

1.4 Qualifications

1.5 Transport

1.6 Lifting with ropes

1.8 Protection from falling

Importance of fall protection when working at heights.

1.9 Electrical work

1.9 Electrical work

Requirements for electrical installations by qualified engineers.

1.10 Electrical connections

1.10 Electrical connections

Rules for connecting the awning to the power source.

1.11 Automatic controls

Safety notes for automatic control systems.

1.14 Uncontrolled operation

Safety measures for preventing unintended operation.

1.15 Test run

1.16 Squashing areas

Identification and prevention of squashing hazards.

2. Important notes/Safety notes for operating instruction

2.1 Safety notes

General safety notes for operating the awning.

2.2 Reading the operating instructions

Importance of reading operating instructions.

3. Cleaning and maintaining the awning

3.1 Maintenance

5. Assembly of the VertiTex WeiTop

5.1 Casing fixing VertiTex WeiTop

Steps for fixing the awning casing.

5.2 Attaching the cover caps

5.3 Attaching the VertiTex WeiTop wire brackets (90 post)

5.4 Attaching the VertiTex WeiTop wire brackets (115 post)

5.4 Attaching the VertiTex WeiTop wire brackets (115 post)

5.5 Attaching the VertiTex WeiTop wire (90 post)

5.6 Attaching the VertiTex WeiTop wire (115 post)

5.6 Attaching the VertiTex WeiTop wire (115 post)

5.7 Attaching the elastic buffer to the bottom rail of the VertiTex WeiTop for Terrazza

5.8 Use of VertiTex WeiTop wire braces after positioning the posts

5.8 Use of VertiTex WeiTop wire braces after positioning the posts

6. Assembly of VertiTex WeiTop on indented posts

6.1 Casing fixing VertiTex WeiTop

6.2 Attaching the wire guide to the bottom rail

6.2 Attaching the wire guide to the bottom rail

7. Recommended way to run the VertiTex WeiTop motor cable

7. Recommended way to run the VertiTex WeiTop motor cable

8. Operation

8. Operation

How to operate the VertiTex WeiTop awning.

9. Fault analysis

9. Fault analysis

Troubleshooting common awning faults.

Declaration of Performance

Declaration of Performance

EU Declaration of Conformity

EU Declaration of Conformity