VertiTex WeiTop – Instructions for assembly, maintanance and use |
Informations importantes pour les revendeurs spécialisés et l’utilisateur final Version | Version 24.10.2019
Reserve technical changes | Sous réserve de modifications techniques Item no. | N° art. 126363-0000 Page | Page 2/28
Notice de montageAssembly instructions
���
Contents Page
1. Important notes/Safety notes for assembly instruction 4
1.1 Safety notes 4
1.2 Read the assembly instruction 4
1.3 CE mark 4
1.4 Qualifications 4
1.5 Transport 5
1.6 Lifting with ropes 5
1.7 Ladders 5
1.8 Protection from falling 5
1.9 Electrical work 5
1.10 Electrical connections 6
1.11 Automatic controls 6
1.12 Use 6
1.13 Intended use 6
1.14 Uncontrolled operation 6
1.15 Test run 7
1.16 Squashing areas 7
2. Important notes/Safety notes for operating instruction 7
2.1 Safety notes 7
2.2 Reading the operating instructions 7
2.3 Intended use 8
2.4 Operation 8
2.5 Windy conditions 8
2.6 Snow and ice 8
2.7 Leaves and foreign bodies 9
2.8 Obstructions 9
2.9 Operation during power failure 9
3. Cleaning and maintaining the awning 9
3.1 Maintenance 9
3.1.1 Spare parts 9
4. Description of design and function 9
Page
5. Assembly of the VertiTex WeiTop 10
5.1 Casing fixing VertiTex WeiTop 10
5.2 Attaching the cover caps 11
5.3 Attaching the VertiTex WeiTop wire brackets (90 post) 11
5.4 Attaching the VertiTex WeiTop wire brackets (115 post) 12
5.5 Attaching the VertiTex WeiTop wire (90 post) 12
5.6 Attaching the VertiTex WeiTop wire (115 post) 13
5.7 Attaching the elastic buffer to the bottom rail
of the VertiTex WeiTop for Terrazza 13
5.8 Use of VertiTex WeiTop wire braces after
positioning the posts 14
5.9 Mounting cable bracket ring 15
6. Assembly of VertiTex WeiTop on indented posts 16
6.1 Casing fixing VertiTex WeiTop 16
6.2 Attaching the wire guide to the bottom rail 17
7. Recommended way to rund the
VertiTex WeiTop motor cable 18
8. Operation 19
9. Fault analysis 20
10. Fixing creasing in the fabric 21
11. Suggested handover certificate 22
Declaration of Performance 24
EU Declaration of Conformity 26