Weiser HALO - Door Preparation; What is the door thickness requirement for Halo and Aura locks?; Required Door Hole Diameter

©2020 Spectrum Brands, Inc.
66451 Rev 01
2 / 14
Technical Support
1-800-501-9471
www.weiserlock.com
Door Preparation
Halo Keypad, Halo Touchscreen, and Aura support 1-3/8” to 2” (35mm - 51mm) door thickness.
Halo Touch supports 1-3/4” to 2” (44mm - 51mm) door thickness.
Yes, a kit (83033) is available to install Halo and Aura locks on doors with a thickness between 2” (51mm) and 2-1/4”
(57mm). Call our support center at 1-800-501-9471 to order a thick door kit.
Halo Keypad, Halo Touchscreen, and Aura locks are compatible with 1-1/2” (38mm) and 2-1/8” (54mm) door holes.
Halo Touch ngerprint locks require 2-1/8” (54mm) door holes.
Please refer to the Warped Door Installation Guide for the necessary
adjustments to properly prepare your door for a smart lock installation.
1
A
B
C
D
What is the door thickness requirement for Halo and Aura locks?
Is there a door thickness kit for Halo and Aura locks to support
doors thicker than 2” (51mm)?
What door hole diameter is required to install Halo
and Aura locks?
What do I need to correct a door that is warped or has been
aected by weather?