Weiser Powerbolt 2 - Remove User Code; Initiate Code Removal; Specify and Delete Code; Test Code Removal

How to Remove a Code:
THE LEADER IN RESIDENTIAL SECURITY
213826 10/17
2
Press . You will hear one beep.
Make sure the lock is unlocked and the door is open. Enter your existing
Mastercode.
1
4
Press . You will hear one beep.
6
Press . You will hear two beeps if successful. If you hear three beeps, it
was unsuccessful. Repeat from step 1 slowly.
3
Press 3.
5
Enter the User Code you wish to delete.
7
Test the code: While your door is open, lock it. Enter the User Code, then
press . The door should not unlock.