Weiser Powerbolt 2 User Manual

The latch bolt will extend and retract. The lock will beep and the keypad will
turn green or red.
Green (with 2 beeps): The door has successfully learned the orientation of the
door. Continue to step 3.
Red (with 3 beeps): Make sure the door is unlocked and that you are using a
fresh set of batteries. Repeat step 1.
THE LEADER IN RESIDENTIAL SECURITY
213826 10/17
While the door is open and unlocked, enter the following default
Mastercode to teach the lock the orientation of the door:
1. Press 0-0-0-0.
2. Press . You will hear one beep.
3. Press 0.
4. Press .
1
Press the button. The door will unlock.
4
3
2
How to Perform the Door Handing Process:
Press the button. The latch bolt will extend to lock.
Enter the default User Code (1-2-3-4).
5
IMPORTANT: It is recommended that you replace the default
Mastercode and default User Code with codes of your own.
1
2 4
3
5
6
7 9
8
0
Programming Video: https://www.youtube.com/watch?v=eZSwXjcYwAQ
Installation Video: https://www.youtube.com/watch?v=Aomf7oqslas

Weiser Powerbolt 2 Specifications

General

Type	Electronic Deadbolt
Keypad	Yes
Keyless Entry	Yes
Battery	4 AA batteries
Finish Options	Satin Nickel, Venetian Bronze, Polished Brass
Smart Home Compatibility	No
Auto-lock Feature	Yes
Number of Keys Included	2
Adjustable Latch	Yes
Style	Traditional
Bolt Throw	1"
Handing	Reversible
Adjustable Strike	Yes
Finish	Varies by model
Backset	Adjustable 2-3/8" or 2-3/4"
Keyway	KW1
ANSI Grade	Grade 3

Summary

Door Handling Process

Teach Lock Orientation

Enter default Mastercode and follow prompts to teach the lock the orientation of the door.

Locking and User Code Entry

Extend latch bolt to lock, enter default User Code, and test door unlock.

Add User Code

Initiate Code Addition

Enter existing Mastercode and press the lock button to start adding a new code.

Enter New User Code

Press 1-9, then enter a new User Code (4-10 digits) and press the lock button.

Remove User Code

Initiate Code Removal

Enter existing Mastercode and press the lock button to begin code removal.

Specify and Delete Code

Press 3, then enter the User Code to delete and press the lock button.

Test Code Removal

Lock the door, enter the deleted code, and verify the door does not unlock.