37
If you want to repeat the measurement, you should wait at least ve minutes.
The cuff must be fully deflated.
Measurement starts when the correct cuff pressure has been reached. The monitor also
measures your pulse. The value displayed will fall during measurement.
If the cuff pressure is too low, the monitor stops measuring and inflates the cuff again
until sufficient cuff pressure is reached for the measurement.
The cuff deflates when the measurement is complete. The systolic and diastolic blood
pressure and the pulse with the pulse symbol appear on the display.
The values measured will be automatically stored with the date and time once
measuring is complete. 30 storage spaces are available, whether you start measuring
using button 1 or 2. Two people can record their values separately, for example.
If there are more than 30 measurements, the oldest value will be overwritten.
12450 USA final Content REV1.indd 3712450 USA final Content REV1.indd 37 18.10.2012 12:00:1718.10.2012 12:00:17
To Next Page
Loading...
