43
Retrieving values of individual measurements
Saved measurement values can be displayed.
To retrieve the measurements stored in User 1 memory, press button 1 and hold it
down for approximately 3 seconds.
To retrieve the measurements stored in User 2 memory, press button 2 and hold it
down for approximately 3 seconds.
The average values of the last three measurements from the selected memory will be
shown in the display.
If you have switched on language output, this value will also be given verbally..
Press button 1 or 2 to call up the stored values individually. You can scroll through
the newest to the oldest values by pressing the button.
12450 USA final Content REV1.indd 4312450 USA final Content REV1.indd 43 18.10.2012 12:00:2018.10.2012 12:00:20
To Next Page
Loading...
