Disassembly and Repair Section 4
Service Manual 488061 Rev. B Welch Allyn Exam Light III 1
Observe All ESD
Precautions!
Turn unit off. Unplug the
power cord from the outlet
and from the light box!
1. Cover Removal
Unscrew the captured screw at the bottom of
the main housing. Push the cover up and for-
ward.
NOTE: Take extreme care when removing the
cover. The tabs on the cover may break if you
do not push the cover all the way up before
removal.
2. EMI Shield Removal
Remove the 5 phillips head screws.
NOTE: Notice manufactured date stamp on
the EMI shield.
3. Lamp Clip Removal
For first time lamp removal, grasp the wire
clip at the top of the lamp. Rotate the clip
toward the base of the unit it pops out.
NOTE: Discard the clip. It is used only for
shipping.
To Next Page
Loading...
