Section 4 Disassembly and Repair
8 Welch Allyn Exam Light III Service Manual 488061 Rev. B
13. Focusing Sleeve Assembly
A. Insert the rear lens inside the main body.
NOTE: The rear lens is the lens with the
smaller diameter convex shape in the middle
of the lens. The convex shape should be fac-
ing outward.
B. Insert the front lens into the main body.
NOTE: The front lens is the lens with the
larger convex shape. The convex shape
should be facing outward.
C. Insert the end window into the main body.
NOTE: There are three very small tabs on the
lip of the end window. Line those three tabs
with the three long slots of the main body.
To Next Page
Loading...
