Welch Allyn Exam Light III User Manual

2 Welch Allyn Exam Light III Service Manual 488061 Rev. B
Section 1 General Information
Cautions and Warnings
Intense Light: Lamp is extremely bright. Do not stare at the lamp when in
use. May be harmful to eyes.
Caution: Remove power cord from electrical outlet and allow lamp to cool
10 minutes before replacing with a Welch Allyn lamp.
Danger: Electrical shock hazard. Refer servicing to qualified service per-
sonnel.
Caution: Risk of explosion if used in the presence of flammable anesthet-
ics.
Hot Surface: Lamp is hot. May be harmful to skin if touched.
NOTE: This product complies with the current required standards for electromagnetic inter-
ference and should not interfere with other equipment or be affected by other compliant
devices. As a precaution, avoid using this device in close proximity to other equipment.

Welch Allyn Exam Light III Specifications

General

Type	Exam Light
Power Source	AC Power
Focusable	Yes
Arm Type	Flexible
Mounting Options	Wall mount, Table mount
Input Voltage	120 V AC