Disassembly and Repair Section 4
Service Manual 488061 Rev. B Welch Allyn Exam Light III 9
D. Attach the three cam sleeves to the main
body. Align the cam slots of the cam sleeve
with the front and rear lens tabs.
NOTE: Align one sleeve with the front and the
rear lens and the other two sleeves with go on
easier.
NOTE:
FFront
Lens
Tab
Rear Lens
Tab
Observe how the front and the rear
lens tabs, on the front and rear lens, fit in the
cam sleeve.
Note:
Observe that each cam sleeve has a slot
at the rear of the cam sleeve. The slot must
face toward the rear of the assembly.
To Next Page
Loading...
