Welch Allyn Spot VS100 User Manual (English)

Other manuals for Welch Allyn Spot VS100

Directions For Use64 pages

In-Service - Quick Reference Guide5 pages

Basic Instructions17 pages

Questions and Answers:

J
Joy BurchAug 16, 2025
How to fix wireless issues on Welch Allyn Diagnostic Equipment?
- S
  Shannon FrancoAug 16, 2025
  If the wireless icon on your Welch Allyn Diagnostic Equipment is red, try power cycling the vision screener first. Also, verify all network settings are entered correctly. Another solution is to turn the vision screener off, then back on. Ensure that your network name and IP address is identified on the Home screen. If the connection does not automatically reconnect, go to Tools, Network, select Security Type, reselect the correct type (None, WEP, WPA/2 PSK, and WPA/2 EAP-PEAP) then select the highlighted OK.
Y
yweaverAug 19, 2025
What to do if Welch Allyn Diagnostic Equipment restarts?
- A
  Ann RamosAug 19, 2025
  To resolve a system restart on Welch Allyn Diagnostic Equipment, power cycle the vision screener by pressing and holding the On/Off button until a confirmation screen appears, then select Confirm to power off. When the screen turns black, wait 30 seconds and then press the power button to turn the vision screener back on. Ensure the device has power by plugging in the power cord.
M
Matthew HarveyAug 21, 2025
What to do if Welch Allyn Diagnostic Equipment freezes?
- A
  Austin RiveraAug 21, 2025
  If your Welch Allyn Diagnostic Equipment system freezes, and the Power Off window appears, select Confirm to shutdown the device. If the screen freezes, press and hold the On/Off button until the screen goes black, then release the On/Off button. Wait about one minute then perform the normal start-up process.
T
timothymartinezAug 25, 2025
How to troubleshoot printer issues with Welch Allyn Diagnostic Equipment?
- J
  James CarlsonAug 26, 2025
  If you are experiencing printer issues with your Welch Allyn Diagnostic Equipment, start by printing a test print page directly from the printer. After you confirm your printer is in proper working order, verify the printer is on a local network by printing to the printer from a PC on the same local network. If all of the above are in working order perform a System Restart.
P
Paul OsborneAug 28, 2025
Why does my Welch Allyn Diagnostic Equipment say 'Sorry for the inconvenience. We need to reboot the device'?
- J
  James FreemanAug 28, 2025
  If your Welch Allyn Diagnostic Equipment displays the message, 'Sorry for the inconvenience. We need to reboot the device' because the screening mode has encountered a problem, select OK to reboot the device or Cancel to continue using the device in Read Only mode.
J
jacob12Aug 31, 2025
What does it mean when my Welch Allyn Diagnostic Equipment says 'Problem encountered. The device needs to reboot'?