> HP ENVY 5540 Configuration
• The HP ENVY 5540 enables a “wireless direct” connection to the Spot VS100
without connecting to a office network or separate router
• This allows mobility of the Spot VS100 and HP 5540 printer for on-location
printing
• To get started you will need:
– Spot Directions for Use
– Spot VS100 Device
– HP ENVY 5540
• HP Printer Set-Up: Please follow the HP manufacturer instructions to unpack
and set-up the printer
• Please use the following pages to connect your Spot VS100 to the HP 5540
• Note: id and passwords in this document are “examples,” please note actual id
and password while configuring the HP ENVY 5540 for entry on Spot VS100
To Next Page
Loading...
