Page 4
When using power equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and
personal injury, including the following. If used correctly, weld-
ers pose little risk to the operator; however, care should always
be taken to ensure safety and proper performance. Read all
owner’s operating instructions before attempting to operate any
product.
FOR SAFE OPERATION:
KEEP THE WORK AREA CLEAN: Cluttered working areas
(indoor and outdoor) invite injuries.
CONSIDER THE WORK ENVIRONMENT: Don’t expose power
equipment to rain. Don’t use welding equipment in damp or
wet locations. Keep the work area well lit. Don’t use welding
equipment in the presence of flammable liquids or gases.
GUARD AGAINST ELECTRIC SHOCK: Avoid body contact the
grounded surfaces (e.g. pipes, radiator, and electrical appli-
ances).
KEEP CHILDREN AND VISITORS AWAY: Keep children, infirmed
persons and visitors away from the area of operation. Do not
let children, infirmed persons or visitors touch equipment or
extension cables.
STORE IDLE TOOLS: When power equipment is not in use,
keep them in a dry, high or locked area, out of reach of chil-
dren.
WEAR SAFETY GLASSES: Always wear safety goggles or other
suitable eye protection when using welding equipment.
SECURE WORK: Use clamps or a vice whenever possible to
secure work.
DON’T OVERREACH: Keep proper footing and balance at all
times.
SAFETY INSTRUCTIONS
To Next Page
Loading...
