Need help?Do you have a question about the WeldCorp ARC 140 and is the answer not in the manual?
General| Brand | WeldCorp |
|---|---|
| Model | ARC 140 |
| Category | Welding System |
| Language | English |
Basic safety precautions to reduce risk of fire, electric shock, and injury.
Guard against electric shock, wear safety glasses, maintain balance.
Avoid unintentional operation, stay alert, check parts, use expert repairs.
Warning about dual voltage and need for authorized electrician for changes.
Selecting correct electrode diameter and inserting it into the holder.
Warning about needing a 415V plug fitted by an electrician for 415V operation.
Technique for initiating the arc by striking the metal.
Method for feeding electrode, angle, and speed to create a weld bead.
Easiest method for beginners, using light contact and a short arc.
Critical warning about never touching a live electrode.
Table for selecting welding current based on electrode and metal thickness.
Reasons and remedies for excessive electrode consumption.
Troubleshooting damaged electrodes and low voltage issues for arc starting.
Resolving issues with loose connections or poor ground affecting arc transfer.
Details of the 12-month warranty covering defects in material or workmanship.
To Next Page
