WELD & CUT ARC / TIG WELDER AND PLASMA CUTTER
This is a current inverter generator (DC) for plasma cutting with pilot arc ignition and ARC/
TIG welding. This welder allows cutting of electrical conductive materials (metals and alloys),
through the use of gas, usually air, and it allows ARC welding with rutile, basic, stainless steel,
cast iron electrodes type and the TIG welding of the most metals except the aluminium
alloys.
Thanks to the inverter technology which allows achieving high performances while keeping
small size and weight, the machine is portable and easy to handle.
The machine is equipped with the following functions:
• “HOT START”, “ARC FORCE” and “ANTI STICK” (for more details please refer to the GENERAL
PART manual included in the package).
• “MEMORY PARAMETERS” - the microprocessor stores the welding parameters set during the
last use of the machine allowing automatic recovery each time.
• “VRD” – this function guarantees the voltage on the clamp is not dangerous for the end user.
Page 5
DESCRIPTION OF THE MACHINE
To Next Page
Loading...
