OVERVIEW
The Weldtech BW-TIG200ACDC is a feature packed TIG welding ma
chine for
professional TIG welding results with a wide range of materials. AC/DC output
allows use on both ferrous and non-ferrous metals and their alloys. The pulse
feature gives the ultimate in weld control from welding the thinnest of
materials through to full power output. The inverter square wave technology
gives a very smooth and consistent arc, while keeping the power source down
to a very portable size and weight with powerful output and high duty cycle.
Added to this all is MMA capability. The ideal machine for precision
fabrication and repair across a wide range of metals.
UNPACKING YOUR MACHINE
When unpacking your machines, please inspect the machine and accessories
carefully to ensure all components have been received, as per the packing list
below.
Contents
Description Quantity
BW-TIG200ACDC Power Source
1
WP26 Ergo TIG Torch - 4m 1
MMA Lead & Electrode Holder - 3m 1
Work Lead & Clamp - 3m 1
Argon Gas Regulator 1
Gas Hose with clamps - 3m x 8mm 1
Instruction Manual 1
Instruction DVD 1
If you have any questions, please contact your nearest local Weldtech store.
MACHINE SPECIFICATIONS
Specifications
Model
BW-TIG200ACDC
Rated Input Power Supply 230-240V 15A AC Single Phase 50Hz
No Load Output Voltage 56V
TIG Output Current Range 10A-200A
TIG Load Duty Cycle 35% @ 200A
TIG Arc Ignition System High Frequency
MMA Output Current Range 10A-170A
MMA Load Duty Cycle 35% @170A
Dimensions 493 x 330 x 320mm
Net Weight 20kg
Standard AS 60974.1-2006
DUTY CYCLE
The welding duty cycle is the percentage of actual welding time that can occur
in a ten minute cycle. eg. 35% at 200 amps - means the welder can weld at 200
amps for 3½ minutes and then the unit will need to be rested for 6½ minutes.
The unit has a rated duty cycle of 100% at a setting of 140 Amps.
NOTE: The duty cycle can be affected by the environment in which the welder
is used. In areas with temperatures exceeding 40°C, the duty cycle will be less
than stated. In areas less than 40°C higher duty cycles have been obtained.
All tests on duty cycles have been carried out at 40°C with 50% humidity.
To Next Page
Loading...