Weller wd 2 - Safety and Intended Use; Specified Use Guidelines

4-18 WD 2/ WD 2M
2 For your safety
The WD 2 / WD 2M soldering station has been manufactured in
accordance with state-of-the-art technology and recognised
technical safety regulations. There is nevertheless the risk of
personal injury and damage to property if you fail to observe the
safety information set out in the accompanying booklet and the
warnings given in these instructions. Always pass on the
WD 2 / WD 2M soldering station to third parties together with these
Operating Instructions.
2.1 Specified use
Use the WD 2 / WD 2M soldering station exclusively for the purpose
indicated in the Operating Instructions of soldering and unsoldering
under the conditions specified here. Specified use of the
WD 2 / WD 2M soldering station also includes
− observing these Operating Instructions,
− you read and follow all additional accompanying documents,
− observe the national accident-prevention regulations applicable at
the location where the device is being used.
The manufacturer accepts no responsibility for unauthorised
changes/alterations made to the device.
3 Scope of delivery
WD 2 WD 2M
Control unit a a
Power cable a a
Jack connector a a
USB cable a
Operating instructions a a
Safety information
booklet
a a
Software CD a