Need help?Do you have a question about the Weller WD2M and is the answer not in the manual?
Microprocessor-controlled 2-channel station with digital controls and sensors.
Details WMRP and WMRT soldering irons and tweezers.
Temperature control range, accuracy, stability, resistance.
Unpacking, connecting tools, powering on the unit, self-test.
Using scroll keys and radio buttons to set temperature.
Accessing STANDBY, OFFSET, SETBACK, WINDOW functions.
Adjusting displayed temperature to match external measurement.
Checking and adjusting temperature accuracy using an external instrument.
Fine-tuning temperature accuracy at specific points.
Details on voltage, power, temperature, cord, sensor, and tip type.
Important safety instructions specific to the WMRP pencil.
Important safety instructions specific to the WMRT tweezers.
General| Control Type | Digital |
|---|---|
| Power | 120 W |
| Channels | 2 |
| Voltage | 230V |
| Frequency | 50/60 Hz |
| Power Consumption | 120 W |
| Temperature Range | 50-450 °C |
| Output Power | 120 W |
To Next Page