Weller WXP 65 - Page 25

WXP 65 Soldering Tips
XNT soldering tips for WXP 65
Model Type Width A Order no.
description inch mm
XNT 1 Round tip
Length: 27 mm
∅ 0.0197 ∅ 0,5 005 44 850 99
XNT 1S Round slim tip
Length:
28,5 mm
∅ 0.0079 ∅ 0,2 005 44 852 99
XNT 1SC Round slim tip
Length: 27 mm
0.0157 x
0.0059
0,4 x 0,15 005 44 862 99
XNT 4 Round, sloped
45°
Length:
29,5 mm
∅ 0.0472 ∅ 1,2 005 44 855 99
XNT 6 Chisel tip
Length: 29,5 mm
0.063 x 0.0157 1,6 x 0,4 005 44 856 99
XNT A Chisel tip
Length: 28,0 mm
0.063 x 0.0157 1,6 x 0,4 005 44 851 99
XNT B Chisel tip
Length: 27,0 mm
0.0945 x 0.0315 2,4 x 0,8 005 44 857 99
XNT C Chisel tip
Length: 27,0 mm
0.126 x 0.0315 3,2 x 0,8 005 44 858 99
XNT D Chisel tip
Length: 28,0 mm
0.1575 x 0.0315 4,0 x 0,8 005 44 853 99
XNT GW Gull wing
Length: 33 mm
005 44 854 99
XNT H Chisel tip 0.0315 x 0.0157 0,8 x 0,4 005 44 859 99
XNT K Chisel tip
Lenght: 28 mm
0.0472 x 0.0157 1,2 x 0,4 005 44 860 99
XNT KN Knife
Lenght: 33 mm
0.0787 2,0 005 44 863 99
Barrel 005 87 657 58
Subject to technical change without notice!